OTEC - 100 mm (4”) Oil Filled Motor
OTEC - 100 mm (4”) Oil Filled Motor
test
Salient Features
• Completely rewindable.
• Cooling and lubrication by nontoxic fluid.
• High quality ball bearing & mechanical seal.
• High efficiency electrical design. (lower operating cost)
• 4" NEMA coupling flange.
• Pressure compensation diaphragm.
Specifications
- Ratings - Single Phase - 0.37 to 3.7 kW
- Ratings - Three Phase - 0.37 to 5.5 kW
- Supply voltages (Tolerance +6%/-10%):
- 50 Hz, 1 Phase, 220 - 230 V
- 50 Hz, 3 Phase, 380 - 415 V
- Degree pf protection : IP68
- Continious Duty S1
- Ambient temperature : 35 C
- Rotation : CCW from top
- Maximum nos. of starts/hour : 30
- Water pH : 6.5 - 8
- Use cooling sleeve for borewell size
- larger than 150mm
- Minimum cooling flow along the
- motor : 0.08 m/sec
- Mounting : Vertical
- Available in 60 Hz also
Material of Construction
| PART NAME |
0.37-5.5 kW MATERIAL |
| ROTOR SHAFT | SS-420 |
| CABLE | PVC/RUBBER |
| SAND GUARD | NBR |
| STUD & NUT | SS-304 |
| MECHANICAL SEAL | SiC |
| UPPER HOUSING | CI-CLADDED |
| BEARING | BALL BEARING |
| MOTOR TUBE | SS |
| ROTOR | CU |
| LOWER HOUSING | CI |
| MOTOR BASE PLATE | SS |
| PRESSURE CUP | NBR |
